I am a mother , a wife, an artist as my daughters kindy teacher calls me :), a Photographer, a crafty mom, and a builder of many things I am "MOM".. I don't mean to brag, gloat or parade in any form or manner, but Oh My!! I am proud of ME...lol I hold my head high and proudly say I made THIS" my Bed, & side tables. yay for me!.. but it came with bruises to the legs a few on my arms, an aching back and headaches...lol but all worth it.. of course a skilled experienced carpenter would breeze through it. I am also a rustic, modern industrial combination kind of girl. so finding anything remotely to my taste was hard, and quite expensive when I did find something I liked, it was always in the thousands!! OUCH!
I have been literally pondering about making my own bedroom set with my hubby for over a year. I found this really great DIY site...... to follow and every so often I would pull it out, but I was very scared to dive into it, as I have never really built nothing big like that, except for my Moroccan table but I got help from a good friend of ours so it wasn't all on me.
We bought our house 18 months ago, and when doing so we went on a DIY renovation frenzy, we painted, built a pony wall, I added crown moulding, base boards, Wood floors, I made decorative frames for the windows, added back splash glass tiles in the kitchen, revamped my file place with a mosaic tile and added to the mantle, the list goes on and on, and 18 months later we are still renovating.... but with all that being said I never got a chance to get a new bed :( why the heck could I not make a bed right??? We decided to downsize, from Eastern King to Queen, and my DIY Journey begins. Hubby totally has my back and absolute faith in what I do, more so than I do ..lol
I followed the above DIY instructions, and the Idea was to spend under $100. which I managed successfully for the bed with extra,so with the addition of two side tables and a bench, with extra tweaks & personalized additions here and there. I spent under $160. it helps if you have materials lying around :) I will give step by step directions & details. I hope to inspire you as much as the lovely family that put up the DIY blog Post that inspired me :)
Materials I used for a Queen size platform standard (I will add remaining materials I used for my tweaks further along)
- 2 x 4 x 96 – 10 pieces ($2.o5 ea)
- 2 x 8 x 8 – 6 pieces ($5.23 ea)
- 5/8 in. x 4ft. x 8ft. Oriented Strand Board Square Edge ($10.97 each) x2 pieces or you can use MDF (a little more expensive)
- deck screws ($9.37)
- wood glue ($3.42)
The tools I used
- Miter saw
- power drill/driver
- drill bits for pilot holes
I did everything and just changed up the base from 10x8 to 8x8 so it wouldn't be so tall. and I used the strand board opposed to the MDF, to stay within budget, as I was tweaking it anyways
I drilled pilot holes in everything before the screws, to avoid the wood splitting.
My Dimensions are as follows
My Queen Mattress we bought measured 60" W x 8o" L
I allowed 6" extra on each side except for the headboard side for the platform overlap
Queen Bed (Platform):- 68" Wide x 88" Long for the Oriented Strand Board
The other thing I did differently is a bit of a cheat :) I had "Home Depot" do all my cuts :) totaled an extra ($6.55) for all the cuts inclusive of my side tables and bench
I found the base to be easy, the structure is put together with the same concept of a wall frame.
Place the top and bottom base together....with the larger piece above sitting on top, in this instance I didn't need to glue or screw anything down, as it was heavy :) below taking a photo break with the kids
Time for the Oriented Strand board 4ft x8ft, I had one cut by home depot to make the 68" width
Now this is my complete job unfinished of course. my tweaks begin, with a border around all three sides left right and bottom to prevent the mattress from sliding and for cosmetics ........I purchased 12, 1x3x8, ($1.55 each ) 1 Quart of dark walnut stain ($7.95), 1 Quart of Shellac ($12.98), and x2 black stool from Ikea for my side table legs ($5.99 each) ( more info below) I attached the borders with two pieces to each side (left & right) and to the bottom, with an additional two to the bottom front panel, this gives it a clean finish and secures the mattress from future slides :)
Now for the side tables... and bench which is not pictured here, cause I have yet to make its legs, which I have opted to make thick wood legs. I will update with the picture once it is complete.
Materials I used
2x8x8 ($5.23 each) total of 5
I screwed in pilot holes for everything, and put them together like a box with no lid pretty straight forward.
Burning for the rustic burnt look I am going for... my Son Malik took this photo of me working with my phone :) I used a regular wood burning tool, and I ran a propane torch over the wood.
My bench top I used the scraps from the 2x8's making it 56" long x 13" wide. I laid them out over a 2x4, 50" long, piece of wood I had in the garage, glued and drilled together with the deck screws making pilot holes first, I then attached extra support with 1x2 strips on either side.
I did some sanding in between stages, to smooth out the edges and unwanted stains etc. I then stained the three pieces
and finally Shellac, I placed the legs on both of my side tables with the black stool from Ikea I removed the legs and placed them on the bottom of my side tables centred. I plan on using the top of the stool for my head board decoration :) I will include that with my bench update.
My new mattress is 12" in height which makes it a perfect height in all, totaling, 24" in height
The Bed Frame took me 2 hours. with the tweaks and finishing touches it took a total of 4 hours.
the side tables & bench took me 3 hours in total from start to finish. (note I am not including time factors for stains and shellac drying time)
thank you for looking, if you have any questions please feel free to ask, I am sure I have not covered everything, I am new to the DIY instructional side of things, but I am happy to answer anything :)